Tools Needed:
- 2.5mm Allen key or hex driver
- #1 Phillips screwdriver
NOTE: The machine should be unplugged and cool to the touch before beginning.
1. Start by removing the reservoir cover and the reservoir from the machine.
2. Unscrew the two 2.5 Allen head screws from the top panel.
3. Use the #1 Phillips screwdriver to unscrew the four (4) small Phillips-head screws from around the reservoir window. You can now lift off the top panel and set it aside.
4. You can now lift off the top panel and access the inside of the machine through the top.
