Lelit Mara X: Removing the Panels

Use these instructions to remove the panels from your Mara X for maintenance or repair.

Tools Needed:
- #2 Philips screwdriver

NOTE: The machine should be unplugged and cool to the touch before you begin.

1. Start by removing the drip tray, cup tray and reservoir.


2. Remove the eight Philips head screws from the top panel shown here. Remove the top panel and set it aside.



- Stop here and reinstall the reservoir if all you need is access through the top. -

3. Remove the remaining screws from the top of each side of the wrap around side panel.


4. Remove the screws from the bottom corner of each side of the wrap around side panel.



5. Remove the single screw in the bottom middle of the back side of the wrap around panel.

6. You can now gently pry the panels outward in front and pull the wrap around panel straight back to remove it from the machine.

To complete the full panel removal process, continue through to the following guides:
Lelit Mara X: Disassembling the Reservoir Tray
Lelit Mara X: Accessing the Underside of the Machine