Lelit Mara X: Disassembling the Reservoir Tray

Tools Needed:
- 7mm wrench or deep socket

1. Start by removing the panels from the machine.

2. Use the 7mm wrench or a 7mm deep socket and ratchet to remove the retaining nuts on the reservoir mounting studs as shown.

2. You can now lift up the reservoir and move it to the side of the machine.

3. If you need more room to work, you can continue by disconnecting the silicone intake tube.



4. Then unplug the gray low-water alarm wires.

5. You can now set the whole reservoir tray aside.