Maintenance and Repair
      Back to home
      1. Help Center
      2. Profitec MOVE
      3. Maintenance and Repair

      Profitec Move: Repackaging

      This article shows how to properly repackage your Profitec Move for shipment

      Material Needed:

      • Profitec Move Packaging
      • Tape

      Note: If you are sending your machine in for repair you do not need to include the water reservoir, drip tray, or any accessories (i.e. portafilter, tamper, etc…)

       

      Steps:

      1. Follow these instructions to drain the boilers of the Profitec Move.
      2. Place the drip tray and the accessories in the accessories box (See Note Above) and place the protective bag OVER the machine.

        Move_Repackaging 1Move_Repackaging 2
      3. Set the machine into the box. Ensure the machine is oriented correctly with the drip tray frame in the narrow portion of the foam cutout.
        Move_Repackaging 4Move_Repackaging 3Move_Repackaging 5
      4. Place the top foam around the machine with the wider portion of the foam at the front of the machine.
        Move_Repackaging 5Move_Repackaging 6
      5. Place the accessories box on top of the top foam. Please do this even if you are sending your machine to us without the accessories. The accessories box will help keep the machine secure inside of its box.
        Move_Repackaging 7
      6. Tape the top of the box.