Cleaning & Maintenance

Profitec Pro 800: Panel Removal

Below you will find instructions for removing the panels from the Profitec Pro 800 Espresso Machine.

Tools Needed:

  • 3mm Allen Wrench

1. Unscrew the lever and set aside.

2. Remove the four screws holding the top panel in place.
Pro_800_Panel_Removal_1


3. If you tip the machine backwards you will be able to see the 6 screws that need to be loosened or removed.

Profitec Pro 800: Panel Removal


4. Remove the back panel by loosening the screw on each side hidden underneath the back lip of the back panel.

Profitec Pro 800: Panel Removal


5. Remove the side panels by loosening the screw found inside the front panel and sliding it downward and then back.

Profitec Pro 800: Panel Removal


6. When reinstalling the side panels, ensure the washer is on the front screw of the side panel to ensure the panels will not slip.

Profitec Pro 800: Panel Removal