Profitec Grinders
      Back to home
      1. Help Center
      2. Profitec Grinders

      Profitec T64: Replacing the Worm Drive

      Below you will find instructions for replacing the worm drive assembly on the Profitec T64 Espresso Grinder.

      Tools Needed:

      • 1mm Allen Wrench
      • 2.5mm Allen Wrench

      1. Remove the hopper.

      2. Remove the adjustment knob with the 1mm allen wrench.

      Profitec T64: Replacing the Worm Drive

      3. Remove the 2 base plate screws with the 2.5mm allen wrench.

      Profitec T64: Replacing the Worm Drive

      4. When reinstalling the knob, the screw needs to line up with the flat side of the adjustment pin.

      Profitec T64: Replacing the Worm Drive