You'll need:
- Small phillips head screwdriver
First, you'll need to remove the top panel from the machine. At the front of the machine, you'll see your PID box.
There are two screws on the back of the box fastening it through the front of the machine. Remove these two screws.
Slide the back casing of the box off over the length of ribbon wire
Pull the front of the PID panel through the front of the machine
Unplug the ribbon wire from the front half of the PID
Slide the back casing of the PID off of the ribbon wire.
To install your new PID, follow these instructions in reverse. If you have any questions, reach out to us at [email protected]