Tools needed:
- 16mm crescent wrench
- socket wrench + 19mm socket
- flat head screw driver
1. Start by removing the panels.
2. Locate the delivery tube attached to the steam/hot water valve on the front of the machine. With a 16mm wrench, loosen the nut attached to the copper tube:
2. *Carefully* push the copper pipe to the side. Make sure not to bend or twist the copper pipe, if it breaks or there is a crack it will need to be replaced.
3. Using the socket wrench and a 19mm socket, remove the adapter piece on the back of the steam/ hot water valve:
(You might need to hold the valve from the front to help stabilize while loosening the adapter from the back.)
4. Remove the steam/hot water valve from the front of the machine and locate the joystick seal gasket. Using a flat head screw driver, unscrew the joystick seal gasket from the valve.
Once the gasket is out, you can swap it out for a new one and follow the steps above in reverse order to reinstall the valve and the delivery tube.