ECM V-Titan 64

ECM V-Titan 64: Capacitor Testing and Replacement

Here is the step by step process for swapping the motor capacitor in the ECM V-Titan 64 espresso grinder.

Tools needed:

  • 4mm allen key

Begin by testing the motor capacitor. Then replace it if necessary. 

1. Remove the bottom panel of the grinder by taking out the three 4mm allen screws.

20200214_144541

2. Unplug the capacitor's two wires.

20200214_144458

3. Slide the capacitor out of the zip tie and swap in the new one. The two wires do not have specific spots so they can be plugged in in either orientation.

20200214_144423