Eureka Atom: Cleaning Clogged Burrs/Chute Video

Below are instructions for cleaning clogged burrs on a Eureka Atom espresso grinder. This is useful if the burrs get locked due to quick, large burr adjustments, the grind being set too fine or if the burr chamber gets dirty over time.

Before doing this we recommend unplugging the grinder.

Tools required:

• 2.5mm allen wrench
• 3mm allen wrench
• phillips screwdriver

NOTE: These instructions show a pre-2020 Eureka Atom model. Post-2020 models use a different chute design, but are otherwise identical.