La Marzocco Linea Mini: Panel Removal Instructions

Below you will find step-by-step instructions for removing the panels from the La Marzocco Linea Mini espresso machine. (Difficulty ☕☕)

You will want to unplug the machine and allow it to fully cool before doing this procedure.

Tools Needed:

• Long phillips screwdriver
• Flathead screwdriver
• 7mm crescent wrench

1. Remove the top panel of the machine by taking out all of the screws underneath the cup tray.

* Note: If you are only removing the top panel, the starred screw can be left in.

*If you need to access the group head you can remove the top panel from the group head with these 4 screws

2. There are screws in the bottom of the side panels that need to be loosened, we recommend not removing them fully as they can be difficult to get back in. You can find these two along the back.

3. Remove the 4 screws (2 on each side) from the top front of the machine. Do not remove the lower four screws.

4. Loosen the 7mm nuts holding the temperature adjustment wheel in place. Again, don't remove them as they can be difficult to get back in place. From here, you should be able to maneuver the panels backward off of the machine.

5. When reinstalling the panels, we recommend attaching the board to the side panels before reinstalling the top panel.