- Help Center
- Eureka Grinders
- Eureka Atom / Atom 65 / Atom 75
-
INTERNAL ONLY
-
Getting Started
-
Espresso 101
-
Warranty, Ordering & Returns
-
LUCCA A53 (Direct Plumb & Mini) by La Spaziale
-
LUCCA M58 by Quick Mill
-
LUCCA S58 by Profitec
-
LUCCA X58 by Quick Mill
-
La Marzocco Linea Mini
-
La Marzocco GS3
-
Lelit Bianca
-
Lelit Elizabeth
-
Lelit Victoria
-
ECM Synchronika
-
ECM Special Edition Classika PID
-
ECM Mechanika V Slim
-
ECM Casa V
-
Profitec Pro 300
-
Profitec Pro 500
-
Profitec Pro 600
-
Profitec Pro 700
-
Profitec Pro 800
-
Rocket Appartamento
-
Rocket R58 / Cinquantotto
-
Rocket Giotto
-
La Spaziale S2 EK
-
Rancilio Silvia
-
Rancilio Silvia Pro
-
Bezzera BZ10
-
Bezzera Duo MN
-
Izzo Alex Duetto
-
Quick Mill
-
Breville Oracle
-
Dalla Corte Mina
-
Slayer
-
Fellow ODE
-
Profitec Grinders
-
ECM Grinders
-
Lucca Grinders
-
Baratza Grinders
-
Eureka Grinders
-
Compak Grinders
-
Breville Grinders
-
Dalla Corte Grinders
-
Macap Grinders
-
Fiorenzato Grinders
Eureka Atom: Chute Replacement Video & Instructions
Below you will find instructions for installing the updated chute on the Eureka Atom Espresso Grinder.
Tools needed:
- 2.5mm Allen Wrench
- 3mm Allen Wrench
1. Remove the hopper from the machine and clear out any beans from the throat of the grinder.
2. Remove the top plate of the grinder with the 3 screws circled here.

3. Remove the control panel of the grinder with the 2 screws circled here.

4. Remove the old chute from the grinder by taking out the 2 screws pointed out here.

5. Install the new chute with the 2 screws pointed out here.
