General Maintenance
      Back to home
      1. Help Center
      2. LUCCA M58 by Quick Mill
      3. General Maintenance

      LUCCA M58/X58 V2: Auto Shut-Off Programming

      The V2 M58 and X58 espresso machines have an Auto Shut Off built-in. This feature will power down the machine's elements after it sits idle for a set amount of time. (Difficulty ☕)

      Setting the Auto Shut-Off:

      1. Turn off your M58 or X58.
      2. Lift the brew lever and leave it in the up position.
      3. Turn on your M58 or X58.
      4. The blue light will flash. If you see three flashes, you have just turned Auto Shut-Off on. You can now lower the brew lever and power-cycle the machine.
        1. If desired, you can repeat steps 1-3 to turn Auto Shut-Off off — you will see two flashes when Auto Shut-Off is turned off.

        NOTE: When the Lucca M58 or X58 is powered on normally (brew lever down), the blue light will flash to indicate whether Auto Shut-Off is on or off. This occurs immediately after powering the machine on, before the PID initializes. Three flashes: Auto Shut-Off is ON. Two flashes: Auto Shut-Off is OFF.

        Economy mode:

        Economy mode is a feature required in Europe for energy efficiency standards. It allows the machine to place the steam boiler in standby after 30 minutes of inactivity. The steam boiler can be reactivated by lifting the brew lever. After lifting the lever, the steam boiler will resume heating, and you’ll see your steam pressure continue standard operation.