Skip to content
Sign in
  • There are no suggestions because the search field is empty.

ECM Mechanika V Slim: Replacing the SSR

Below you'll find the instructions for replacing the Solid State Relay in an ECM Mechanika V Slim.

Tools Needed:
- 2.5mm Allen key or hex driver
- 3mm Allen key or hex driver

1. Remove the panels. 

2. Locate the SSR mounting bracket and remove the two retaining screws, then gently remove bracket from the machine. Be careful not to disrupt the electrical connections.
ECM_Mechanika_SSR_01
ECM_Mechanika_SSR_02
ECM_Mechanika_SSR_03 
3. Dismount the SSR by removing the two mounting screws. ECM_Mechanika_SSR_04-1


4. Mount the replacement SSR in the same orientation, then use the above image to move the electrical connections from the old SSR to the new SSR, taking care that everything goes in the right spot.