Flair 58 Pro 2 Espresso Maker User Manual

In this manual, you should find everything you need to operate and maintain your Flair 58 Pro 2 Espresso Maker.

Please read carefully before operating your manual espresso maker. Check out our website for specifications of the Flair 58 Pro 2 Espresso Maker, including accessories and other details. For setup information, please take a look at the setup guide.

Getting Started:

After reading through the Flair 58 Pro 2 setup guide, test your water. Espresso machines have specific water requirements. There are two primary considerations: filtration and hardness. Please carefully read about the importance of water in espresso to understand how water affects your espresso machine. For further learning, check out Coffee School's Water 101

Note: It's essential to test your water, filter, and soften to obtain 35-85 ppm to avoid scale and damage to your machine. RO (reverse osmosis) or distilled water does not contain enough mineral content and could cause issues with your machine. The SCA Water for Brewing Standards explains what's needed to obtain water suitable for your machine and coffee.

Technical Details:

Please look at the spec table on our product page for a complete list of technical details.

When you're ready to start pulling shots, check out our Espresso 101 section to learn about steaming milk, latte art, our suggested starter espresso recipe, grinder dial-in tips, and much more!

Additional Resources:

For help dialing in your equipment or pulling shots, check out the articles below or contact our coffee experts and technicians.