Lelit Victoria: Replacing the Power Switch

Use these directions to replace the power switch on your Lelit Victoria espresso machine.

Tools Needed:
- #2 Phillips screwdriver
- Slim flat-bladed screwdriver (or similar)

NOTE: The machine should be unplugged and cool to the touch before beginning.

1. Remove the top panel from the machine.

2. Identify the back of the power switch inside the machine and take note of the orientation of the electrical connectors.

3. Remove the electrical connectors, then use the slim flat-bladed screwdriver to pry the red retaining O-ring from the back of the power switch.

4. Reach into the machine and squeeze the clips on either side of the power switch to compress them.

5. Work the power switch out of the machine a little at a time, then pull free.

6. Use these steps in reverse order to install the new switch.